The Orbit 3D Printer Flexbed provides a smooth surface for ample bed adhesion and easy print removal. The Orbit Flexbed eliminates the need for masking tape, glue, or other traditional methods for achieving bed adhesion when 3D printing. This replacement Flexbed is specifically designed for use with the InkSmith Orbit 3D Printer.
The Flexbed can be replaced on your Orbit 3D printer by gluing it in place on the printing plate with a white gluestick. It is recommended that you thoroughly wash and dry the printing plate before gluing on another Flexbed. Built-up layers of glue, or failure to secure the Flexbed in place may lead to print failures.
To remove a print from the Flexbed you can use a print removal tool or peel off the Flexbed to flex the print off of the surface.
Specifications: 160mm x 158mm
How to Install Your Flexbed
Orbit 3D Printer Replacement Filter
Save CAD $-19.99
The Orbit Replacement Filter is comprised of HEPA-13/Carbon filtration and is designed to eliminate any airborne particles that occur during the printing process. 3D printer filters should be replaced on a yearly basis.
ABS or Acrylonitrile butadiene styrene, is a strong plastic filament that is popular among avid 3D printer users. ABS is especially useful for prototyping and manufacturing parts. ABS is a great option for filament if you're looking for a stronger material than PLA.
*Please note: ABS filament is NOT recommended for use in schools or libraries as this material gives off a noticeable plastic smell and toxic chemical when heated. If you choose to print with ABS we recommend using a closed, and filtered 3D printer in a well-ventilated area.
Printing Temp: 230-240°C Bed temp: 90-100°C Printing conditions: ABS must be printed on a heated bed.